EXAMINE OUR STRONG POINTS
BUILT IN OIL TANK IN MAIN MACHINE FRAME :
To make good looks,the main frame of castings of machine is designed to work as main stand of machine and hydraulic oil tank. The filters ,main hydraulic cylinder and hydraulic oil delivery pump is concealed in this main part.
NEGLIGIBLE PIPE FITTINGS :
The Paper Cutting Machine Hydraulic Clamping is provided with a unique MANIFOLD device & all the hydraulic operating valves are directly fitted over the manifold itself.All the pipe fitting is eliminated by use of manifold.Pipe fitting is major cause of oil leakage.
LOW HYDRAULIC PRESSURE :
Low Pressure, when the clamp is used to help align the stock, it is operated by a foot pedal & cutting line is checked while the pressure remains low.
HIGH HYDRAULIC PRESSURE :
After checking at low pressure when we press the two electric push buttons to make a cut high hydraulic pressure sets down on the paper stock to grip it for cutting accurately.
The Paper Cutting Machine Hydraulic Clamping is operated all throgh ELECTRIC PUSH BUTTONS OR THROGH PROGRAMME & transmission of power is through Electro-Magnetic Clutch and brake system.
The machine is provided with a unique oil dipped REDUCTION GEAR BOX for noiseless running with long life.
TWO HANDED CUTTING CYCLE SWITCH :
To make cut, you must press both cutting buttons simultaneously till the knife starts. If either one is released or both is released the machine stops immediately.
DOUBLE STROKE PREVENTION :
The Paper Cutting Machine Hydraulic Clamping is provided with a unique safety device that prevents double knife strokes, means pressing of both cutting buttons continuously will not allow the knife to come down unless & until it is released & pressed again.
PHOTO ELECTRIC SAFETY GUARD :
The Paper Cutting Machine Hydraulic Clamping is provided with photo electric transmitter receiver sensors for safety measures . If anything obstructs the infra red beams, the knife stops immediately. The positive drive of the machine ensures that when the knife is moving up after cutting the stock it stops only at its desired position.
MECHANICAL OVER LOAD PREVENTION :
The Paper Cutting Machine Hydraulic Clamping is provided with shear bolts that guards against over loads, they provides full protection on each cut.